Showing posts with label toilet repair. Show all posts
Showing posts with label toilet repair. Show all posts
Monday, September 20, 2010
Solving Common Toilet Problems
Quick and Easy Toilet Repairs That Anyone Can Do!Even if you’re less than handy when it comes to home plumbing repairs, the following toilet tricks are simple enough for you to tackle on your own.
Phantom Toilet Flushes:
If your toilet frequently refills spontaneously, as though somebody has just flushed it, you’ve got a phantom flush. No, your house probably isn’t haunted, but that sporadic running is caused by a slow leak from the toilet tank into the toilet bowl. The problem is likely a bad flapper or flapper seat. To fix it, drain the toilet tank and the toilet bowl, and check the flapper. Clean the seat if necessary or replace the flapper mechanism if it appears cracked, worn or damaged. Flappers and flapper parts are available at any hardware store.
Toilet Bowl Emptying Too Slowly:
A weak flush, or a toilet bowl that empties too slowly, usually means the flush holes under the rim of the bowl are clogged. Using a curved piece of wire, gently poke each hole to clear away debris. A wire coat hanger works well for this, and you can use a small mirror to help you find the holes inside the toilet rim.
Ugly Toilet Clogs:
By far the most common—and frequently most unpleasant—toilet problem is a clog. To clear a clogged toilet drain, try a force-cup plunger instead of the standard type. A force-cup plunger has a small rubber extension at the bottom that fits into the bowl drain for better suction. Put the bulb into the drain and pump straight up and down with force. Slowly lift the handle and let some water in to see if the clog is cleared.
If you’ve got a really serious toilet clog, you may need something a little stronger than a plunger. Try a closet auger, which you can purchase at any home improvement or plumbing supply store. Insert the auger into the toilet drain and twist the handle as you push the rotor down. Be careful not to scratch the bowl.
Leaky Toilet Seals:
There are at least five seals on a standard toilet, and all of them can leak. Before you can fix it, you have to figure out which seal is leaking. The largest seal is between the toilet tank and the toilet bowl; if you’ve got a leak here, water will shoot out from under the tank every time the toilet is flushed. The smaller seals at the bolts that mount the toilet to the floor and the one at the base of the ballcock will cause smaller leaks. To replace one of these faulty seals, drain the water from the toilet tank first. Then simply take off the damaged seal and put on a new one. If you suspect a leak at one of the smaller seals, you might also try tightening the bolts or nuts; this can often stop a minor leak.
The fifth seal is the wax seal mounted underneath the base of the toilet. If this seal is damaged, you’ll have water leaking from the toilet onto the floor. This can cause the floor to rot, which means big trouble. If you simply caulk the seal without repairing the leak, water will be trapped under the base of the toilet, making the situation worse. You’ll have to remove the entire toilet and replace the wax seal. If you don’t feel up to it, this would be the time to call in a plumbing professional.
Related Plumbing and Toilet Information from Horizon Services...
Wednesday, January 13, 2010
What's The Story on Low Flow Toilets?
Low flow toilets have been touted as a way to cut down on water usage while whittling utility costs. However, critics question the real value of these low flow commodes. Sometimes the toilets need to be flushed two or even three times to completely clear waste—and doesn’t that sort of defeat the purpose?It has been estimated that we Americans flush more than six billion gallons of water down our toilets every day. That’s a lot. Previously, residential toilets sold in the United States were designed to use about 3.5 to 7 gallons of water per flush. Most low flow toilets use about 1.6 gallons per flush at most.
In order to really understand the effectiveness of low flow toilets, we need to think about how often the average American uses the bathroom.
Obviously, going to the bathroom is not an exact science. It’s pretty safe to say, however, that the majority of people in the US pass liquid waste more frequently than solid waste in a typical day. For the sake of this example, let’s just assume that the average American uses the toilet six times a day—five times for urination, once for a bowel movement. With an older toilet, using 3.5 gallons of water per flush multiplied by six flushes, that’s 21 gallons of water consumed in a single day.
One of the biggest complaints lodged against low flow toilets is that it sometimes takes more than one flush to fully expel waste—particularly solid waste—from the bowl. So if we factor that into our example and say that those same six bathroom visits require a total of ten flushes with a low flow toilet (five for the liquid waste—because even the weakest low flow toilets should have no problem voiding a little extra liquid—and five more for a single solid waste event), at 1.6 gallons of water used per flush that’s still only 16 gallons a day. No matter how you slice it, 16 is significantly less than 21 and in this scenario would save almost 2000 gallons of water a year.
Keep in mind, too, that low flow toilets have come a long way over the past fifteen years. Sure, the first models left much to be desired in terms of complexity of design and functionality. In fact, most manufacturers simply added parts to existing fixtures, which sometimes inhibited the reduced water flow technology. Now, though, low flow toilets are much more comprehensive, and other elements like the shape of the bowl and configuration of the tank mechanisms have been revamped to work more effectively with water conservation features.
Several university studies have proven that today’s average low flow toilet is just as effective at removing waste, if not more so, than a standard commode. You may have to shop around and do some research to find a model that doesn’t require repetitive flushing or developing a close, personal relationship with your plunger, but they are out there.
Got a Toilet Problem? Call Horizon Services!
Broken toilets, running toilets, leaking toilets, clogged toilets, toilets that won't flush, toilets that need to be installed...the plumbing and drain professionals at Horizon Services can handle virtually any toilet job under the sun!
Subscribe to:
Posts (Atom)
Subscribe!
Posts
All Comments
My Blog List
AddThis
Keystone Partner
Horizon Services is a Keystone Partner of Philadelphia Union, Major League Soccer Team
